Carbide Burrs
Thompson Grinders offers a complete line of new carbide deburring tools, along with a full resharpening service of all carbide burrs. We are backed by more than 30 years of burr making and resharpening experience. Put our burrs to the test. We are sure you will like our quality, price and service.
All carbide burrs are brazed on a 1/4" x 2" hardened steel shank unless otherwise requested. Other shank diameters and lengths available. A 3/8" shank is recommended for 3/4" and 1" diameters. All burrs standard single cut unless otherwise specified.
Cylindrical
| Tool No. | Diameter | Flute Length | |
 |
T-A250 | 1/4" | 1/2" |
| T-A375 | 3/8" | 3/4" | |
| T-A500 | 1/2" | 1" | |
| T-A625 | 5/8" | 1" | |
| T-A750 | 3/4" | 1" | |
| T-A1000 | 1" | 1" |
Ball Shape
| Tool No. | Diameter | Flute Length | |
 |
T-B250 | 1/4" | 1/4" |
| T-B312 | 5/16" | 5/16" | |
| T-B375 | 3/8" | 3/8" | |
| T-B500 | 1/2" | 1/2" | |
| T-B625 | 5/8" | 5/8" | |
| T-B750 | 3/4" | 3/4" | |
| T-B1000 | 1" | 1" |
Cone Shape
| Tool No. | Diameter | Flute Length | |
 |
T-C250 | 1/4" | 1/2" |
| T-C375 | 3/8" | 3/4" | |
| T-C500 | 1/2" | 1" | |
| T-C625 | 5/8" | 1" | |
| T-C750 | 3/4" | 1" |
Cylindrical Ball End
| Tool No. | Diameter | Flute Length | |
 |
T-D250 | 1/4" | 1/2" |
| T-D312 | 5/16" | 3/4" | |
| T-D375 | 3/8" | 3/4" | |
| T-D500 | 1/2" | 1" | |
| T-D625 | 5/8" | 1" | |
| T-D750 | 3/4" | 1" |
Egg Shape
| Tool No. | Diameter | Flute Length | |
 |
T-E250 | 1/4" | 3/8" |
| T-E375 | 3/8" | 5/8" | |
| T-E500 | 1/2" | 3/4" | |
| T-E625 | 5/8" | 1" |
Flame Shape
| Tool No. | Diameter | Flute Length | |
 |
T-F250 | 1/4" | 3/4" |
| T-F312 | 5/16" | 3/4" | |
| T-F375 | 3/8" | 3/4" | |
| T-F500 | 1/2" | 1-1/4" | |
| T-F625 | 5/8" | 1-7/16" | |
| T-F750 | 3/4" | 1-5/8" |
Cone Radius End
| Tool No. | Diameter | Flute Length | |
 |
T-L250 | 1/4" | 5/8" |
| T-L312 | 5/16" | 1" | |
| T-L375 | 3/8" | 1-1/16" | |
| T-L500 | 1/2" | 1-1/4" | |
| T-L625 | 5/8" | 1-5/16" | |
| T-L750 | 3/4" | 1-1/2" |
Round Tree Shape
| Tool No. | Diameter | Flute Length | |
 |
T-R250 | 1/4" | 1/2" |
| T-R312 | 5/16" | 3/4" | |
| T-R375 | 3/8" | 3/4" | |
| T-R500 | 1/2" | 1" | |
| T-R625 | 5/8" | 1" | |
| T-R750 | 3/4" | 1" | |
| T-R750A | 3/4" | 1-1/4" | |
| T-R750B | 3/4" | 1-1/2" |
Pointed Tree Shape
| Tool No. | Diameter | Flute Length | |
 |
T-T250 | 1/4" | 1/2" |
| T-T312 | 5/16" | 3/4" | |
| T-T375 | 3/8" | 3/4" | |
| T-T500 | 1/2" | 1" | |
| T-T625 | 5/8" | 1" | |
| T-T750 | 3/4" | 1" |
Inverted Cone
| Tool No. | Diameter | Flute Length | |
 |
T-G375 | 3/8" | 3/8" |
| T-G500 | 1/2" | 1/2" | |
| T-G625 | 5/8" | 5/8" | |
| T-G750 | 3/4" | 5/8" |
Angle Cutter
| Tool No. | Diameter | Angle Included | |
 |
T-J375 | 3/8" | 60 |
| T-K375 | 3/8" | 90 | |
| T-J500 | 1/2" | 60 | |
| T-K500 | 1/2" | 90 | |
| T-J625 | 5/8" | 60 | |
| T-K625 | 5/8" | 90 | |
| T-J750 | 3/4" | 60 | |
| T-K750 | 3/4" | 90 | |
| T-K1000 | 1" | 90 |